CD600 | TDS meter

Milwaukee's economical testers are easy-to-use and low cost instruments to measure quick and reliable pH, EC or TDS values. Measuring electrical conductivity is the best way of checking the amount of salt or total dissolved solids (TDS) in water.

Milwaukee provides you with a range of pocket testers that will allow you to measure from very low to very high conductivity solutions. All EC/TDS testers compensate for the temperature variance automatically.

The CD600 is a TDS meter specifically designed for water analysis. The calibration procedure is very simple and fast. This TDS water tester has automatic temperature compensation, 10 ppm resolution and a range of 0 to 1990 ppm. CD600 TDS pen is supplied complete with protective cap, calibration screwdriver, batteries and instructions.

• Measures Total Dissolved (TDS) direct and with automatic temperature compensation.
• Ideal range for hydroponics (0 to 1990 ppm).
• Units in ppm easily convertible to uS/cm.
• Factory calibrated with the ability to recalibrate if needed.
• Automatic Temperature Compensation (ATC).
• 350 hours continuous use (4 x 1.5V batteries included).
• Simple one point calibration.

View the Full line of TDS METERS here! >>

Range: 0 to 1990 ppm
Resolution: 10 ppm
Accuracy: ±2% Full Scale
Typical EMC Deviation: ±2% Full Scale
Calibration: Manual, at 1 point through trimmer
Temperature Compensation: Automatic from 5 to 50°C, with ß=2%/°C
Environment: 0 to 50°C / 32 to 122°F; max RH 100%
Battery Type: 4 x 1.5V Alkaline (included)
Battery Life: Approx. 350 hours of continuous use
Calibration Solution: M10032B (25 sachets 20 mL ea.)
Dimensions: 6 x 1.2 x 0.95 inches (180 x 65 x 32 mm)
Weight: 3.5 ounces (0.99 g)