Eurosafe 60 pre-washes, washes, thermally disinfects and dries in a single cycle, so there is\u00a0no need to clean by hand. This guarantees more effective and efficient results in less time and with fewer risks for the operator. The large, 60-litre tank can be used to thermally disinfect many items, including handpieces, loose instruments, cassettes and containers. The wide range of accessories optimizes the use of the space available.<\/p>\n
The user-friendly interface can be\u00a0utilized\u00a0to program up to 40 cycles, customizing them\u00a0to match specific needs and materials by adjusting\u00a0settings such as washing time and temperature. Eurosafe 60 guarantees complete, secure traceability and it becomes even more effective if connected\u00a0to the other Euronda Pro System devices. It validates and records the data of all disinfection cycles,\u00a0which can be saved on a USB key and transferred to a computer.<\/p>\n
Ecological<\/strong><\/p>\n Consumes only 1.7 KW and 12 liters of water per short cycle, while the automatic dispenser eliminates wasted detergents.\u00a0It plugs into the mains with the classic 220 V socket (three-phase is not necessary).<\/p>\n Optimized<\/strong><\/p>\n Compact but with large capacity: the 60 liter chamber can accommodate up to 2 full loads of a 24 liter autoclave.\u00a0The numerous accessories available allow for optimal handling of handpieces, instruments and cassettes.<\/p>\n Forced hot air drying<\/strong><\/p>\n All programmed thermal disinfection cycles end with a drying phase: a powerful fan coupled with a heating resistor injects hot air into the washing chamber from several points to ensure complete drying of the load. The hot air drying system guarantees the total elimination of water deposits on the exterior and interior of instruments equipped with cables. For absolute safety, a HEPA filter is available as an option.<\/p>\n STARTER KIT<\/strong><\/p>\n Eurosafe 60 XD makes it possible to manage loads and optimize thermodisinfection procedures:<\/p>\n\n