Menu
Close
Available to back order. ETA will be 4 - 6 weeks.
The Motor101A Includes:
(1) State101A: State Data Logger
(1) Current Switch
(1) IFC200: Interface Cable
The MadgeTech Motor101A was designed to measure and record the on/off status changes for motors or other equipment drawing up to 200 Amps.
Just clamp the Motor101A to a wire and when the current passing through exceeds 150 mA the output changes, providing a voltage for the Motor101A to measure. This device can hold up to 825,753 readings, but memory will only be used if the status has changed.
The Motor101A is compatible with the latest MadgeTech 4 Software making starting, stopping, and downloading simple and easy. Graphical, tabular, and summary data is provided for analysis and can be viewed as customizable engineering units.
| Memory | 825,753 readings |
| Reading Rate | 4 Hz to 1 every 24 hours |
| Baud Rate | 115,200 |
| LED Indicators | Red & Green |
| Push-Button Start | Yes |
| Battery Life | 10 years typical |
| Material | ABS Plastic |
| Dimensions | Data Logger: 1.4 in x 2.2 in x 0.6 in (36 mm x 56 mm x 16 mm) Current Switch: 2.1 in x 3.5 in x 1.0 in (54 mm x 89 mm x 16 mm) |
| Operating Environment | -15 °C to +40 °C (+5 °F to +104 °F), 10 %RH to 90 %RH non-condensing |
| Required Interface Package | IFC200 |
| Approvals | CE |
| State Resolution | 1 second (reading rate dependent) |
| Amperage Range | 0.15 to 200 Amps |
| Trip Point | 0.15 A (150 mA) fixed (200 mA AC for 50 Hz operation) |
| Status Output | N.O.1.0 A at 30 VAC/DC |
| Housing | Split Core |
Four channel data logger with pulse and two-state…
Sixteen Channel Data Logger with Alarms
Monitors and records the occurrence, duration, an…
8-channel, data acquisition logger with 5″ touc…
Reviews
There are no reviews yet.