MC310 PRO | Conductivity Monitor

The MC Monitors are designed to continuously monitor pH, EC or TDS values directly in your reservoir. Each unit features a user selectable set-point. An LED visual alarm is activated and flashes when the pH, EC or TDS level rises either Above or Below (user selected) that set-point.

All these instruments run on a 12V adapter so there's no need to worry about failed batteries and each unit comes with mounting kit, probe, probe holder and starter calibration solution.

Professional EC - Conductivity Monitor

• User selectable Hi/Low Set Point
• Manual 1 point calibration
• Visual LED alarm
• Supplied with 12 VDC adapter and 20ml 5000 µS/cm calibration solution
• MA812/2 EC Conductivity Probe with 2m cable

• Range: 0.0 – 10.0 mS/cm
• Resolution: 0.1 mS/cm
• Accuracy: ±2% F.S.
• Calibration: Manual, 1-point
• Set point: 1.0 to 5.0 mS/cm
• Alarm: Visual, active when reading is higher or lower than set point
• Temperature Compensation: Automatic, from 0 to 50°C | 32 to 122°F
• EC electrode: MA812/2 (included)
• Environment: 0 to 50°C / 32 to 122°F; max RH 95%
• Power Supply: 12 VDC adapter (included)
• Power Drivers: 115 VAC, 2A, 60Hz or 230 VAC, 1A, 50Hz
• Mounting kit (Included)
• Dimensions: 5.9 x 3.2 x 1.35 inches (148.5 x 82.5 x 32 mm)
• Weight: 6.3 ounces (180 g) (meter only)