PROCAP IX | Capacitance Probe

They feature interference-free operation, simple calibration, and fail-safe functionality and perform accurately even in dusty, sticky, or clinging materials. A vast assortment of probes and extensions make these point-level capacitance probes highly customizable for a variety of solid, liquid, and slurry materials.

PROCAP IX Power Requirements: Universal power supply 24 to 240 VAC/VDC

Output Relay: DPDT 10 Amp at 250 VAC

Ambient Temp: -40°F to +185°F (-40°C to +85°C)

Process Temp: To 250°F Delrin probe (121°C); to 500°F Teflon probe (260°C)

Pressure: 500 PSI Approvals & Certifications: Listed for Class I, Groups C & D and Class II, Groups E, F & G Hazardous Locations

Enclosure Type: NEMA 4X, 5, 7, 9 & 12

Housing Enclosure: Die cast aluminum, USDA approved powder coat finish

Mounting: 1-1/4” NPT or 3/4” NPT 316 SS standard; 1-1/4” NPT 316 SS & sanitary flange optional

• Explosion proof design for Class I hazardous location applications
• “Quick-Set” simple calibration
• Triple thread screw-off cover
• Dual conduit entrance
• Unsurpassed sensitivity 0.5 pF
• PRO-Shield compensates for material buildup
• Operates below RF range, temperature stable calibration and protection from RF interference
• Fail-safe, switch selectable high/low
• Adjustable time delay to 30 seconds
• Optional sensing probes: Delrin or Teflon sleeved, food grade, flush mount, solid and flexible extensions

• Point level detection and process control for solid, liquid and slurry materials
• Used in bins, vessels, tanks, chutes and conveyors where an explosion rated sensor is necessary
• Plastics, chemicals, coal, fly ash, concrete, food ingredients, pharmaceuticals, feed, grain, mining, foundries, wood or paper processing, many other materials